Prerequisites for Harmony Controller 5.0.0 installation with Thunder ADC:  


 

Node Configuration (Physical or Virtual)

1 node deployment

16 CPU, 64 GB RAM, 1.2TB persistent storage (SSD preferable)

3 node deployment

8 CPU, 32 GB RAM, 500 GB persistent storage (SSD preferable) – each

HA supported on Hypervisors like VMWare & Xen with additional Floating IP address on same subnet

Operating System:

CentOS 7.6 freshly installed. Please ensure XFS filesystem with ftype=1

Network Requirements:


Harmony Controller IP address

Static IP address for each node and a floating IP for HA.

Ports access for Harmony Portals

TCP HTTPS – 443, 8443, 7443

TCP HTTP - 9080

Optional: TCP Plaintext – 80, 9081

Remote Access from admin network

TCP 22

Ports from Thunder ADCs to Harmony Controller

TCP 8080, 8443, 9093, 2222

From Harmony Controller IP address to Thunder ADC management IP

TCP 443 or Thunder management port if it is different

From Admin to Thunder ADC management IP

TCP 443 or Thunder management port if it is different, TCP 22 for remote access

3 Node setup

Between Nodes: 

TCP – 6443, 6783, 6789-6810, 9898, 10250, 22, 2379, 2380, 3300

UDP - 6783

(for installation and upgrade)

Thunder ADC version

 5.0.0 (ADFW and CGFW)